Aqara Wireless Mini Switch
The Aqara Wireless Mini Switch is a remote control switch with a stylish compact design and low energy consumption. You can place or stick it almost anywhere. Single press, double press or long press to control various smart accessories, such as Smart Light and Smart Plug.
Compatibility
Aqara Wireless Mini Switch is compatible with the following systems:
£17.99
EAN / Barcode: 6970504212572
Description
Controls smart accessories and can be activated at the touch of a button
The Aqara Wireless Mini Switch is a remote control switch with a stylish compact design and low energy consumption. You can place or stick it almost anywhere. Single press, double press or long press to control various smart accessories, such as Smart Light and Smart Plug.
Features:
- Designed to Fit Everywhere: No wiring required. The minimal design allows you to place it anywhere or attach it to a surface with a sticker.
- Smart Control in Apple Home App: Works with other HomeKit-enabled accessories in the Apple Home app to make your life easier.
- Aqara Home Automation: You can customise different scenes with Aqara’s suite of smart home products.
- Works as a Smart Doorbell: Wireless Mini Switch can be used as a doorbell when combined with the Aqara Hub. You can also customize the ringtone through the Aqara App (iOS/Android).
- Work as an Emergency Button: The Wireless Mini Switch can also act as an emergency button at home. When pressed, Aqara Hub will send out a push notification and sound the alarm.
- Advanced Technology: Aqara Wireless Mini Switch is a remote control switch with a compact design and low energy consumption. Supports up to 50,000 presses*. Adopts V-0 grade flame-retardant PC panel that allows for high-temperature resistance.
Manuals and Guides
Frequently Asked Questions
What actions does this Aqara Wireless Switch support?
It supports single press, double press, and long press. These can signify different automations. It can control other smart devices with different actions.
What is the maximum installation distance between the Aqara Wireless Switch and the Hub?
The indoor environment requirements vary, and maximum signal strength between the Hub and the Aqara Wireless Switch is different, however you should ensure there are no more than 2 walls between the switch and the corresponding hub.
Why does the Aqara Wireless Mini Switch fail to connect? How to reconnect?
There are 3 possible reasons:
- Operation error. Try to add the mini switch according to the adding method again.
- The device is too far apart from the Hub. Try to move the device closer to the Hub, with as few obstacles as possible.
- There are too many devices under the Hub.
What is the Aqara Wireless Mini Switch offline often?
There are 3 possible reasons:
- If the device is too far apart from the Hub, Check the distance between the mini switch and the Hub and attempt to install the device closer to the Hub.
- Low battery or no battery. You need to replace the battery.
- The device is installed on the surface and the signal has been interfered with. Ensure you avoid metal surfaces.
How to identify if the Aqara Wireless Switch works properly?
- Use the eject pin to push the reset hole of the wireless mini switch. If the Hub makes voice prompts, “Normal link confirmed”, it signifies that the Hub and the Wireless Switch are communicating properly. Go to ②; If there is no voice prompts, then move the switch closer to the Hub and try again. If there is still no voice prompt, the device might be deleted or run out of battery. Refer to the device adding methods to add the device or replace the battery.
- Single press/double press/long press the Wireless Switch several times, enter the Home of Wireless Switch in app, refresh the device records (log). If there is related log, it indicates the device works properly.
How do I reset the Aqara Wireless Switch? Under what circumstances need to reset?
- Press and hold the reset hole on the device for 3 seconds. The indicator will flash 3 times before reverting to factory settings.
- If a device needs to be paired with another device hub, it will need to be reset before the new pairing will succeed.
Videos
Product Specifications
Physical and Performance Attributes | |
|---|---|
| Weight | 64 grams |
Misc Product Attributes | |
Model: WXKG11LM Battery: CR2032 Wireless Protocol: Zigbee Dimensions: 45 × 45 × 12 mm (1.77× 1.77 × 0.47 in.) Operating Temperature: -10℃~+55℃ (14℉~131℉) Operating Humidity: 0 – 95%RH, non-condensing What’s in the Box: Wireless Mini Switch x 1, Sticker x 1, Quick Start Guide x 1 App: Apple Home app (iOS 10.3 or later), Aqara Home app (Android 5.0 or later, iOS 10.3 or later) | |