LiftMaster SL600EVK Sliding Gate Opener Kit – myQ Compatible
24v
600KG
8M
Maintenance-free 24 V operator for residential sliding gates with leaves up to 8 metres wide. Cutting-edge technology meets modern design.
Compatible with myQ smartphone operation when used with the myQ Internet Gateway accessory.
£874.42
Accessories
Sliding Gate Racking
Please Note: This kit does not include sliding gate racking, however, racking will be required during installation. See product description below for full details.
EAN / Barcode: 4014243224273
Description
Maintenance-free 24 V operator for residential sliding gates with leafs up to 8 metres wide. Cutting-edge technology meets modern design. A door leaf may weigh up to 600 kg per wing. The maximum width of a door leaf per wing is 8 m.
Features
- SMART HOME – myQ compatible smartphone operating enabled*
- 24V DC motor that is dependable
- 3 band multi-frequency radio that is simple to set up and program
- Low standby consumption
*use of myQ features requires the LiftMaster 828EV myQ Internet Gateway
MyQ - What Is It And How Does It Work:
Device of Choice
Control your gate or garage door via smartphone, tablet or Apple Watch
LiftMaster Internet Gateway
Your command is then transmitted to the Internet gateway
Your Gate or Garage Door Opener
Then your command is executed by the compatible gate or garage door opener
Open and Close the Gate or Garage Door
Making it a lot easier to leave and arrive without the hassle
myQ General Info
myQ Installation Guide
App Features
Operate everywhere you go
Open and close your gate / garage door using your smartphone
Real-time notifications
Get notified if your gate / garage door opens, closes or is left open
Custom Schedules
Set up rules for your gate / garage door to be closed at a certain time
Share Access
Allow up to five guests to control your gate / garage door, using myQ Guest profiles
Kit Contents
- 1 x SL600EVK 24v sliding gate motor built-in control board with integrated RF module operating on 868 & 433 MHz EVO code
- 2 x TX4EVF 868.35 MHz, 4 channel remote controls
- 1 x 772E pair of adjustable failsafe photocells
- 1 x Set of installation hardware
- 2 x Emergency release keys
- 1 x Installation manual
Please Note: This kit does not include sliding gate racking, however, racking will be required during installation. You can add your required amount of racking to your order using the accessories list at the top of this page. Not sure how much racking you need? Any other questions? No problem! You can contact us for free technical support by clicking here.
Manuals & Datasheets
Product Specifications
Physical and Performance Attributes | |
|---|---|
| Weight | 11.3 KG |
| Protection Rating (IP) | 44 |
| Operating Temperature | -20°C to +55°C |
Electronics Attributes | |
| Voltage | 24V |
| Input Voltage | 230-240 V |
| Frequency Range | 50/60 Hz |
Motor Attributes | |
| Duty Cycle / Work Cycle | 8 (hour) 27 (day) |
| Motor Speed | 240 mm/s |
| Torque | 600Nm |
| Motor Type | Sliding |
| Motor Voltage | 24v |
| Safety Edge Input | 8K2OHM, NC |
| Soft-Start / Soft-Stop | Yes |
| Automation Type | Sliding |
| Kit Type | Single |
| Max. Gate Leaf Length (M) | 8M |
| Max. Gate Weight (KG) | 600KG |
| Force (N) | 600N |
| Number of Leafs | 1 |
