Nice RunKit 6 RUN2500I

Description

Nice Run 2500I 230v sliding gate opener kit with 3-phase inverter and electromechanical limit switch for sliding gates up to 2500kg and 18m.

Very quiet and smooth operation thanks to the gear motor on bearings.

Downloadable Materials

• Nice Run Manual (.pdf)
• Nice RUN2500I Motor Addendum (.pdf)
• Nice Run Wiring Connections (.pdf)

Features

Safe and Intelligent

• Fully compatible with Nice’s Opera management system for GPRS and Bluetooth connectivity / operation
• Connection for EN compliant 8.2K safety edges
• The Nice Run series is equipped with a temperature sensor which adapts the motor force to the climatic and environmental conditions, while adapting the thermal cut-out protection and self-ventilation intensity depending on temperature readings.
• A master and slave selection can automatically synchronise two motors, this makes it possible to automate 2-leaf sliding gates set opposite each other
• Features an obstacle detection system and automatic programming of opening times, and acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre
• The Run is capable of self-diagnosis, alerting the user to faults via flashing lights

Sturdy, Practical and User Friendly

• The Nice BlueBUS system allows the connection of up to 15 control, safety and signalling devices to the control unit with just two wires
• The control unit can be connected by means of a simple connector and can be housed directly inside the motor
• The Run’s gear motor is on bearings, resulting in very quiet and smooth operation
• Strong and sturdy pressure die-cast aluminium design with epoxy painting
• Aluminium release handle for easy opening

RUN2500I Version With Built-In Inverter

• The inverter included in the RUN2500I model enables the power supply and drive of the 3-phase motor with single-phase current at 230v AC
• Adjusts speed of the automation from a minimum of 8.2 m/min to maximum 15.4 m/min by acting on the frequency
• Increases the torque during the deceleration phase to improve performance
• Reduces the risk of the automation blocking on impact with obstacles

What’s Included

• 1 x RUN2500I Motor with 3-phase inverter and electromechanical limit switch (230v)
• 1 x RUA2 Integrated control unit
• 2 x ON2E Remote Controls
• 1 x EPMB Pair of Bluebus Photocells
• 1 x OXI Receiver